Tasman Chemicals  

Product Coverage and Use Rates

ALL-STONE SEALER: One litre will seal approximately 20 square metres per single coat.

PORCELAIN SEALER: One litre will seal approximately 30-40 square metres on a single coat.

HERITAGE FINISH: One litre will seal approximately 20 square metres on a single coat.

LIFT OFF: One litre of diluted solution will clean approximately 25 square metres.

MULTI STRIP1: One litre will be sufficient to remove approximately 5 square metres of ALL-STONE SEALER, TERRA SAND or SLATE SEAL.

PAVER SEAL & CONCRETE: One litre will seal approximately 10-15 square metres per single coat depending on the porosity of the pavers.

PREMIUM LONG LIFE SEAL: One litre will seal 10 square metres with two coats.

SLATE FINSH: One litre will seal approximately 40 square metres on a single coat.

SLATE SEAL (Gloss or Satin): One litre will seal approximately 10 square metres of tiles with 2 coats.

SLATE SEAL SOLVENT: One litre will be sufficient to remove approximately 5 square metres of SLATE SEAL.  For removal of heavy build up of SLATE SEAL additional quantities of SLATE SEAL SOLVENT may be required.

TERRA SAND: One litre will seal approximately 10-15 square metres dependent on the porosity of the tiles.

TILE KLEEN: One litre of diluted solution will clean approximately 50 square metres.

As these products are used under conditions beyond our control, the seller will not be responsible for results obtained.  If you have any queries about the use of the products, please contact the Technical Services Department at Tasman Chemicals.

 


1Multi Strip replaces Super Strip (Aug 01)